Remove certain stains, either at home, in dry cleaning or laundry industry, always a complicated process, if not done it correctly, you can continue the stain on clothes, sheets or towels for too long.

It is therefore essential that we use a suitable soap or industrial detergent effective so we can remove all types of stains without any problems.

The washing process is complex, so we will consider the type of stain to change things like the pre-wash, bleach / wash, rinse, and spin softening. The washing process is influenced by different factors such as temperature, chemicals, weather and mechanical (friction or friction of clothing against the drum of the washing machine). When one of them is reduced, the process must be compensated by increasing one of the other.

It is very important to consider the type of fiber that we will wash, because is not the same washing cotton or synthetic fibers, and the type of clothing such as bedding, linens, tablecloths, etc. In general, both the fiber such as cotton have good resistance to high temperatures (90 °), but we recommend washing cotton at 90° and between 40 and 60 ° for mixtures.

For difficult stains, it is important to use bleach or chlorine, which remove the remaining dirt, pigment spots, and also traditionally been used as a disinfectant.

How to clean stains ...?

• How to clean stains of sweat: Sweat stains are not soluble in water, therefore there will be left to soak but wash with prewash. It is best to use a scented detergent to eliminate odors, and appropriate to the hardness of water in each area and how soiled clothing, as an enzyme detergent.
• Cleaning grease stains: Fat stains are not water soluble, so no use putting clothes to soak. It is best to pre-wash laundry and industrial detergent stain to suit the different degrees of dirt and water hardness. We especially recommend DETERSOL Basic. If necessary, also add bleach.
• How to clean blood stains: Blood stains are water soluble, so put the clothes to soak in warm or cold water can be helpful, also program a prewash. As always, it is essential to use an industrial detergent stain to suit the different degrees of hardness of water and dirt. We recommend using the DETERSOL Viep.
• How to clean stains of feces and urine: Stains are organic and cleaned as blood. First is recommended to remove any traces with cold water and soak or prewash program. Then wash as normal with enzymatic detergents DETERSOL Viep or Basic, and use bleach as DETERSOL whiteness or color.
• How to clean stains from coffee, tea, medicine, wine, juices ...: This kind of stains are removed in the washing and bleaching stages. Therefore must be washed normally and add a bleach for the final stages. We recommend Detersol whiteness, and DETERSOL Viep or DETERSOL Basic.

How many times have you come in the morning to a store and have found a nasty painted on the door or the windows?

Unfortunately this is a very common surprise that restaurants, bars, shops and even private homes suffer daily. Therefore, professionals of the industrial cleanin should provide effective and simple products to clean graffiti.

Eurosanex have three really effective products to clean graffiti:

• Kenex GFT-1
• Kenex GFT-3
• Travi SL-20

If you have to clean a graffiti on a porous surface, use the Kenex GFT-1. It's viscous to be able to penetrate in all holes and it works even on resistant inks.

• How to use it? Apply it with a brush and let it act without dry. Rub with a brush and then wipe it with a pressure washer and hot water. In case of extremely resistant inks, apply the graffiti cleaner Kenex GFT-3.

For smooth surfaces or glass, used Kenex GFT-3. Since the surface is easier to clean, the graffiti will be eliminate almost effortlessly.

And if you want to protect any surface from annoying graffiti, use Travi SL-20. This is a product which simply by spraying any surface such as walls, windows, shutters, etc.. it prevents ink from adhering, by a protective film that makes the ink to slip.

With these three products, to clean graffiti is no longer a problem!

In Eurosanex, thanks to our daily efforts to improve and move towards excellence, we have created a complete line of products to care for, clean, disinfect and protect the skin in the workplace. This is our line of hand gels and moisturizers Dermex.

But what is special about these products? These hand gels and moisturizers are sold in special sealed bags, to avoid losing any of its properties and contaminated with bacteria, especially important in work environments related, for example, with health or food.

The product line Dermex are indicated for all types of companies. Thus, there is hand gel to remove light or high dirt, and hydrating gel for sensitive skin. Furthermore, for industrial hygiene, Eurosanex has disinfectant gels, used with both water and dry, and an efficient moisturizer supplementing the protective treatment.

These products fits perfectly with the new dosing ISOAP line, with modern design and intended to place the bag of Dermex line product.

Thus, the products do not spill or become contaminated, and waste are considerably reduced.

Did you try the Dermex line?

In a company dedicated to the chemical products production waste management is very important, at economically and ecologically area.

In Eurosanex we are really conscious about ecology and ecologic products. We develop and refine more and more our products and we are certified to ISO 14001, which certifies our environmental management system, and we take care of our waste so much.

This year we achieved what we call "zero spillage", which is reuse, gather, treat and manage our waste water in order to not pour any drop that is not properly treated, to make it as cleaner as possible.

So, when we have some type of contaminant or waste water we accumulate it and a licensed waste contractor is responsible for treat it accordingly.

Everything is reused to the maximum, boxes, cartons, plastic, paper ... We are even working on a new line of ecologic products, to be more ecological if possible.

On the economic front, the cost of dealing with waste is very high, but the main cost is related to the environment, since spillage the untreated waste into sewer and other similar practices are actions that, unfortunately, have become customary in other companies.

Our little actions to protect the planet every day.

In these times of recession, you need to have creative and different ideas to survive but most of all being an entrepreneur.

Although starting a new professional adventure can make you a little dizzy at first, the changes are almost always for the best, especially when betting for a future business and for a job well done.

Have you thought about becoming a distributor of Eurosanex? It can give you many joys, and has advantages that you can not imagine.

Why is an opportunity to become a distributor of Eurosanex?

1. - Because of the very good quality of our products, made by ​​with controlled processes and with the most effective ingredients.

2. - Because of its efficient service, which will help your customers to receive the goods as quickly and accurately as possible.

3. - Because of the technical support you will receive, with the assistance of all kinds: mechanical, chemical ...

4. - Because of the personal support you will receive with the knowledge of an organization in which everyone works hard and with enthusiasm, which this year celebrates 25 years of existence.

5. - Because you become part of a company well positioned in the national market and with a lot of possibilities in European and international markets.

A unique opportunity to work in Eurosanex!

PRFIUMED BIOACOHOL CLEANER

Care, cleaning and skin protection

dermex-presentacion-spanish.pdf