Single phase water pressure cleaner BM2 SIDRA-130/10

HID 2520

The single phase water pressure cleaner BM2 SIDRA-130/10 is ideal to use with hot water in very dirty spaces. It has a stop safety device that prevents the overheating of the pump-motor group when in stand-by.

It also has a 3 axial-piston water pump, as well as pump and burn independent motors. The engine of this single phase water pressure cleaner has thermal protection, as well as a silenced heater and a double-coil serpetine.

This single phase water pressure cleaner has a burner switch, a water temperature regulating thermostat, a hard-wearing fibre gasoil deposit, and a vulcanised rubber front tire.

  • Pressure: 130 bar.
  • Water flow: 10 litres per minute
  • Power consumption: 3 KW
  • Max. temperature: 80ºC
  • Pump motor speed: 1450 rpm.
  • Gasoil deposit capacity: 35 litres.
  • Detergent deposit capacity: 5 litres.
  • Power supply: 230 v / 50 hz.
  • Gasoil consumptiomn: 3.8 litres per hour.
  • Measurements: 96 x 62 x 94 cm.
  • Weight: 101 kilos.

Included accesories:

  • 10-metre high pressure hose. Easy to attach.
  • Thermal prolongation gun. Easy to attach.
  • 70-cm. lance nozzle in stainless steel.

Optional accesories:

  • 20-metre high pressure hose collector

Purchase enabled for distributors only, if you are a distributor please clickhere

Productos de la misma categoría

Would you like to be a EUROSANEX distributor?

Do you know where to buy our products?

Legal warning · Privacy policy · © EUROSANEX 2017 - All rights reserved